5" Core Vent Cavity Ventilator Anti Draught White Cowl for Gas Appliances

Product Information

Acoustic lining reduces sound by 43 dB with internal panel fully open and 50 dB when closed (Dn,e,w). Unobstructed Appliance Operation: Facilitates efficient air intake for your appliance, optimising its performance.

This 5 inch 13kW STADIUM Stadium anti-draft vent has a built in anti draught baffle which is designed to reduce or stop wind blowing through the vent by its unique duct design. Install the Stadium anti-draft vent with a 127mm (5″) core drill. Unlike some other core drill air vents an extension tube is supplied with this core drill ventilator for walls over 9 inches up to a maximum of 23 inches.

5" Core Drill Vents: 1 Results

Upgrade your domestic heating boilers and decorative fuel effect fires with the innovative Stadium Core Vent BM418B. This ventilation solution combines sleek design with advanced features to provide optimal performance and comfort for your living space. BM418B stadium core vent brown outer cowl and brown internal grille 5″ 71K, complete with anti draught baffle. This anti draught air vent is used for Domestic heating boilers and decorative fuel effect fires – Vario 100

The external cowl minimises uncomfortable draughts, reduces noise and light from outside the property and acts as a barrier against wind driven rain whilst providing a free area of 100cm² and is available in both brown and terracotta.The Louvre fits on the internal wall and, similarly to the cowl, reduces draughts, noise and light penetration, while providing a free area of 100cm², it is only available in white. Nighttime Comfort: Discourages night-flying insects from entering your home, creating a peaceful environment.

Brown Outer Cowl and Brown Internal Grille: Aesthetic appeal meets functionality, seamlessly integrating with your home’s design. Another solution, which needs designing in from the start, is passive ventilation. What is Uncontrolled Ventilation? A positive input ventilation system introduces fresh air to the home from a unit placed in loft space. This system is Nuaire’s Drimaster (Image credit: Nuaire) This slotted-style core vent is machined from steel and is used in flat and contour surfaces. Sold in bags of 100 vents. Aluminum – Slotted Core Vents Shalco Super Vents are self-cleaning and feature an opening rate of more than 43%. Using these vents will solve the problem of clogging which can affect the continuous operation of a core molding machine during no-bake molding. The 43% opening rate (compared to an average of 13% for slotted vents and 30% for screen vents) results in more effective and efficient venting. THese vents offer a slot width of 0.010″There really are as many ways to install the Cor-A-Vent Soffit Strip S-400 as there are eave construction details. The 1″ x 1 1/2″ x 4′ cross section gives you maximum soffit/eave ventilation in a minimum space. There are 10 sq. in. NFVA per lineal foot and the S-400 fits in narrow spaces where other vents can’t, like zero overhangs. The vent is s elf-cleaning – the vertical flute orientation doesn’t show the dirt. Sold in 24 4-foot pcs. per ctn. (96 lin. ft.). It is also c rush resistant so you can install with a power nail gun. Pair it up S-400 with any of COR-A-VENT’S ridge vent products for an unbeatable system that c an be installed in multiple layers for additional ventilation. For over 35 years, Cor-A-Vent has manufactured the roof ventilation products necessary to provide your home with the breath of fresh air needed to protect it inside and out, as recommended by the National Association of Home Builders. Since the V-400, the original shingle-over ridge vent, was officially introduced in 1976, Cor-A-Vent has been at the forefront of the attic ventilation market. prevents the build-up of excess levels of humidity (which can lead to condensation, mould and can consequently result to health issues) The Cor-A-Vent Soffit Strip S-400 — The original, continuous soffit venting solution is still the best choice for venting overhangs and eaves – and once architects find out about it, they spec it on every job! With 10 sq. inches NFVA per foot, S-400 provides superior intake ventilation for any detail – from zero overhang to open rafter tails. Smith & Richardson offers the widest range of popular core box vents. Most are available in US and Metric sizes. Brass – Slotted Core Vents